Bosch REXROTH IndraControl VAM 12.1 Скачать руководство пользователя страница 15

Страница: 15 / 96

Important Instructions on Use

2.1

Appropriate Use

2.1.1

Introduction

Rexroth products represent state-of-the-art developments and manufacturing.

They are tested prior to delivery to ensure operational safety and reliability.

Physical injury and material damage might re‐

sult from an inappropriate use of the products!

WARNING

The products are designed for the use in an industrial environment and may

therefore only be used for the intended purpose. If they are not used as inten‐

ded, situations causing personal injury as well as material damage can occur.

Bosch Rexroth disclaims as manufacturer any warranty, liability or

damages occurring due to inappropriate use of the products. Fur‐

thermore, Bosch Rexroth is not paying any compensation. The user

is responsible for any risks resulting from inappropriate use of the

products.

Before using Rexroth products, the following requirements must be met to en‐

sure appropriate use of the products:
●

Anyone handling one of the Rexroth products in any way has to read and

understand the respective safety-related guidelines as well as the instruc‐

tions on intended use.

●

Hardware products have to remain in their original state, in other words,

no modification regarding the design are allowed. Software products must

not be decompiled and their source codes must not be modified.

●

Damaged or faulty products must not be implemented or put into opera‐

tion.

●

It must be ensured that the products are installed as specified in the doc‐

umentation.

2.1.2

Areas of Use and Application

machine control panels of the VAM 12.1/VAM 42.1 design by Rexroth are used

to operate control panels.
It can be necessary to connect additional sensors and actuators to control and

monitor the VAM 12.1/VAM 42.1.

Danger of destruction of the device if not ex‐

pressly stated accessories, add-on compo‐

nents and other components, cables, conduits,

software and firmware is used.

NOTICE

The VAM 12.1/VAM 42.1 may exclusively be used with the accessories and

add-on components specified in this documentation. Components not named

expressly mentioned must neither be mounted nor connected. The same ap‐

plies to cables and conduits.
The products may only be operated with the expressly stated configurations

and component combinations as well as with the software and firmware which

is given and specified in the respective functional description.

DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels

Bosch Rexroth AG

13/93

Important Instructions on Use

Содержание REXROTH IndraControl VAM 12.1

































































































Результаты поиска

Содержание REXROTH IndraControl VAM 12.1

Отзывы:

Похожие инструкции для REXROTH IndraControl VAM 12.1

Бренды по названию

Популярные бренды

Bosch REXROTH IndraControl VAM 12.1, Руководство по планированию проекта

Результаты поиска

Содержание REXROTH IndraControl VAM 12.1

Отзывы:

Похожие инструкции для REXROTH IndraControl VAM 12.1

Бренды по названию

Популярные бренды