Bosch Rexroth IMenip Скачать руководство пользователя страница 5

18

/76

Bosch Rexroth AG

IMenip  |    3 609 929 B63/2008-09

Only use the product within the performance 
range provided in the technical data.

Persons who assemble, operate, 
disassemble or maintain Rexroth products 
must not consume any alcohol, drugs or 
pharmaceuticals that may affect their ability 
to respond.

The warranty only applies to the delivered 
configuration. 

The warranty will not apply if the product is 
incorrectly assembled or handled or not used 
as intended.

Do not expose the product to any mechanical 
loads under any circumstances. Do not place 
any objects on it.

During assembly

Make sure the relevant system component is 
not under pressure or voltage before 
assembling the product or when connecting 
and disconnecting plugs. Protect the system 
against being switched on.

Lay cables and lines so that they cannot be 
damaged, are in accordance with the 
bending radiuses, and no one can trip over 
them.

Before commissioning, make sure that all the 
plug connectors are installed correctly, 
undamaged, and that all screws are 
tightened.

During commissioning

Let the product acclimate itself for several 
hours before commissioning, otherwise 
water may condense in the housing.

Make sure that all electrical connections are 
either used or covered. Commission the 
product only if it is installed completely.

During cleaning

Cover all openings with the appropriate 
protective equipment in order to prevent 
detergents from penetrating the system.

Never use solvents or aggressive detergents. 
Only clean the product using a slightly damp, 
lint-free cloth. Only use water to do this and, 
if necessary, a mild detergent.

Disposal

Dispose of the product in accordance with 
the currently applicable national regulations 
in your country.

3

Delivery contents

The delivery contents include:

• 1 IMenip interface module 

• 1 instruction manual for the IMenip 

interface module 

4

Product description

Performance description

A tightening system is controlled by this 
interface. It can transfer cyclic I/O data.

The IMenip interface module is directly 
supplied with power via the components in 
the System 350.  

Содержание Rexroth IMenip













Отзывы: