Bosch rexroth ctrlX AUTOMATION, Быстрый старт

Страница: 5 / 36

5 ctrlX AUTOMATION First Steps
Intended use
Bosch Rexroth AG R911403760 Edition 01
2 Important directions for use
2.1 Intended use
2.1.1 Introduction
Rexroth products are developed and manufactured to the state-of-the-art.
The products are tested prior to delivery to ensure operational safety and relia-
bility.
WARNING
Personal injury and property damage by using products
incorrectly!
The products may only be used as intended.
Failure to use the products in the intended way may
cause situations resulting in property damage and per-
sonal injury.
NOTICE
Damages resulting from unintended use
Rexroth as the manufacturer shall not honor any war-
ranty, liability or compensatory claims for damages
resulting from unintended use of the products. The user
alone shall bear the risks of unintended use of the prod-
ucts.
Before using Rexroth products, make sure that all the
prerequisites for an intended use of the products are sat-
isfied:
−
Personnel that in any way, shape or form uses Rexroth
products must first read and understand the relevant
safety instructions and be familiar with their intended
use
−
Leave hardware products in their original state, i.e.,
do not make any structural modifications. It is not
permitted to decompile software products or alter
their source codes
−
Do not install damaged or faulty products or put them
into operation
−
Make sure that the products have been installed as
described in the relevant documentation
2.1.2 Areas of use and application
Products of the ctrlX series are suitable for Motion/Logic applications.
NOTICE
Products of the ctrlX series may only be used with the
accessories, mounting parts, and other components
specified in this documentation. Components that are
not expressly mentioned may neither be attached nor
connected. The same applies to cables and lines.
Only to be operated with the hardware component con-
figurations and combinations expressly specified and
with the software and firmware specified in the corre-
sponding documentations and functional descriptions.
Products of the ctrlX series are suitable for single-axis as well as for multi-axis
drive and control tasks. Device types with different equipment and interfaces
are available for using the system in specific applications.