Bosch Rexroth CS660, Руководство по калибровке

Страница: 23 / 31

23/27
Bosch Rexroth Canada I March 2021 ı Revision 3.0
Manually adjust
Min/Max/Emg
values for each
mode&direction
Select Mode
and direction
CALIBRATION
Deflect stick to a
desired speed &
click each button
to save setpoint
Mode, direction, output
current for axis deflected
in
RED in calibration mode
Configure custom
joystick mode names
Disable – power float OFF
Reset – Pfloat needs to
be re-activated once the
output is OFF.
Non Rst
– Pfloat
automatically re-activated
once stick returns to
neutral.
OPTION LIST
No Prox – No prox sensor
PFloat2 – 2
nd
P.flt On/Off
DmpLmt – On/Off
Emg Interlock – Puts
conveyor in pause once
EMG button is pressed
pushed
Msg Flash
– Flash
message when dump limit
prox is triggered
Msg Rst
– Message
disappears once
acknowledged till it is
triggered again
Msg Off
– Msg disabled
Click to START
5 Set up Joystick Operation
A typical spreader system with joystick option consists of the following components:
Once the joystick function is configured the joystick icon would be displayed under SYSTEM:
Click on the icon to pop up joystick configuration screen to calibrate all modes and axis configured.