manualshive.com logo in svg

Bosch R911274804, Руководство по планированию проекта

Поделиться
Скачать
Bosch R911274804 Скачать руководство пользователя страница 63

MKE

DOK-MOTOR*-MKE*******-PRJ1-EN-E1,44 

•

 06.97

Mounting and Installation  

11-5

Note:

If the terminal box must be repeatedly mounted, or has been
repeatedly remounted, then it is recommended that the fa-
stening screws (8) are additionally secured with Loctite 243.

Connecting guidelines for MKE 096

WARNING

Terminal box or cables could be damaged!
Excessive tightening torques could damage screwed jo-

ints or pinch cables. If screwed joints are damaged
then the protection category IP 65 for the terminal box
can no longer be guaranteed!

⇒ 

Therefore, do not use automatic screwdrivers such as
electrical, pneumatic or hydraulic screwdrivers!

MKE motors are equipped with terminal boxes. Cables which correspond
to ready-made INDRAMAT cables must be used for connections. Mount
the cables in the following order:

Fig. 11-3: EExd screwed joints with terminal box lid for MKE 096

⇒ 

Release lid screws (8) and remove terminal box lid (9).

⇒ 

The EExd cable screwed jonts are mounted at the factory. Sealing ring
(1) is screwed to the screwed joints (2) in the terminal box lid. Tigh-
tening torque equals 50 Nm.

⇒ 

Cap nut (5) and washer (4) must be removed.

⇒ 

Cap nut (5) and washer (4) must be guided over power cable (7) or
feedback cable (6).

⇒ 

Check cable sealing ring (3) in screwed joint (2).

⇒ 

Guide cable ends (6) and (7) through the screwed joints (2) into the
terminal box lid (9).

Содержание R911274804













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды