Bosch R911274804 Скачать руководство пользователя страница 53

Страница: 53 / 76

MKE

DOK-MOTOR*-MKE*******-PRJ1-EN-E1,44

•

06.97

Storage , Transport and Handling

9-1

Storage , Transport and Handling

9.1

Notes on the packaging

Notes on storage, transport and handling are on the packaging. Please
comply with the instructions.

Fig. 9-1: Notes on storage, transport and handling on the packaging

9.2 Storage

WARNING

Motor damage and forfeiture of guarantee!
Motors not properly stored could be damaged. The gua-

rantee is also forfeited in this case.

⇒

Please therefore note the following instructions.

Maintain the following conditions during storage:

⇒

permissible temperature range: -20

C to +80

⇒

motors must be stored dry, dust-free and shock-free

⇒

motors must be stored horizontally

⇒

Protective cover of plastic on the drive shaft must not be removed. It
protects against moisture and mechanical damage.

Содержание R911274804













































































Результаты поиска

Содержание R911274804

Отзывы:

Похожие инструкции для R911274804

Бренды по названию

Популярные бренды

Bosch R911274804, Руководство по планированию проекта

Результаты поиска

Содержание R911274804

Отзывы:

Похожие инструкции для R911274804

Бренды по названию

Популярные бренды