Bosch PXX9..K..., Инструкция по эксплуатации

Страница: 12 / 52

en
Operating the appliance
12
Cooking modes menu
The hob has a number of different cooking modes.
To access the cooking modes menu, touch menu in the
cooking zone's settings area.
Residual heat indicator
The hob has a residual heat indicator for each cooking
zone.If it is on, this means that the cooking zone in
question is still hot. Do not touch the cooking zone if its
field on the display is backlit in red.
When the cooking zone is switched off after cooking,
the residual heat indicator will light up. Even after the
hob has been switched off, the residual heat indicator
will remain lit for as long as the cooking zone remains
warm.
1
Operating the appliance
Operating the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
First-time use
When you switch on the appliance for the first time, the
menu for implementing the initial settings appears in the
display panel.
The main screen is then displayed.
Note:
You can change the language and any other
setting at any time. You can find further information on
selecting the language in section
~
"Basic settings" .
Switching the hob on and off
Switch the hob on and off using the main switch.
To switch on: Touch the
#
sensor. A signal sounds and
the touch display lights up. After a short switch-on time,
the hob will be ready for operation.
To switch off: Touch the
#
symbol until the indicator
beside the main switch goes out. The residual heat
indicator remains lit until the cooking zones have
cooled down sufficiently.
Notes
■
The hob automatically switches off if all cooking
zones have been switched off for more than
20 seconds.
■
The selected settings are stored for 10 minutes after
the hob has been switched off. If the hob is switched
back on within this time, the previous settings are
retained. Section
~
"Basic settings" contains
information about changing the time in which the
selected settings are saved.
Setting the cooking zone
Set the required power setting from 1 to 9.
Power setting 1 = lowest setting.
Power setting 9 = highest setting.
Each power setting has an intermediate level.
Cooking modes Function
“ Power levels
Allows you to select the heat setting for
the cooking zone.
% Assist
A preset list of dishes for frying and boil-
ing.
å Cooking functions
The wireless cooking sensor automati-
cally detects the temperature as cook-
ing progresses.
Note: This function will be ready to use
once the wireless cooking sensor is con-
nected to the control panel.
é Frying sensor
The hob automatically detects the tem-
perature as frying progresses.
· MoveMode
The temperature can be adjusted by
changing the position of the cookware
on the cooking zones.