Bosch PTL 1, Руководство по эксплуатации

Страница: 10 / 78

English–1
1 609 929 984 • (04.03) T
The specifications apply for the rated voltage of [U]
230/240 V. For lower voltages and with models for
specific countries, the specifications can vary.
Please observe the order number of your machine.
The trade names of the individual machines may vary.
Please open the foldout page with the illustration of the
tool and leave it open while you read these operating
instructions.
The numbering of the machine elements refers to the
illustration of the machine on the graphic page.
1 Steam shield
2 Water level indicator
3 Rubber surge protector
4 Tank cap with built-in safety valve
5 Handle
6 On/Off switch
7 Hose connection
8 Bayonet connection
9 Safety lock
Not all the accessories illustrated or described are in-
cluded in standard delivery.
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
Working with hot steam can lead to
severe scalding!
Do not direct steam at your own
body, at other persons or at ani-
mals!
Danger of scalding! Never work di-
rectly above your head.
Wear protective gloves!
Steam can escape from the unit.
■
Connect machines that are used in the open via a
residual current device (RCD) with an actuating
current of 30 mA maximum. Do not operate the
machine in rain or moisture.
■
Before each use of the machine, check the cable
and plug. If damage is detected, do not use the
machine. Have repairs performed only by a quali-
fied technician. Never open the machine yourself.
■
If the cable is damaged or cut through while work-
ing, do not touch the cable but immediately pull the
mains plug. Never use the machine with a dam-
aged cable.
■
During pauses in the work, when not in use or dur-
ing work on the machine itself (e.g., changing of
the working tools, repairs, cleaning, adjustment),
pull the mains plug.
■
Never switch on the unit without filling with water.
■
Never submerge the unit in fluids.
■
Fill the unit only with tap water.
Never mix combustible, poisonous, caustic or oth-
er liquids with the filling.
■
Do not exceed the maximum filling capacity (2.4 l).
■
Before removing wallpaper, cover the switches and
sockets on the walls so that they are water and
steam tight.
■
The machine may be connected only to a properly
earthed power system. The socket and extension
cable must have a functional protective conductor.
■
Befor each use, completely unwind the cable.
When using an extension cable: The cable cross
section should be at least 3 x 1 mm
2
.
■
Tightly close the tank and the bayonet connections
before putting into operation (see
Before Use ).
Product Specifications
Wallpaper Remover PTL 1
Order number 0 603 315 1..
Rated input power 1800–2000 W
Warm-up time 5–10 min
Filling capacity 2.4 l max.
Working time per filling approx. 45 min
Weight without mains cable approx. 1.9 kg
Hose length 3 m
Protection class / I
Product Elements
For Your Safety