Bosch PS90 Скачать руководство пользователя страница 3

-3-

Safety Rules for Inspection Camera

Always check the work area
before  beginning  a  job.  Do

not  allow  cable  to  contact  electrical,
chemical,  or  moving  hazards.  Shut  off
circuit  breakers  to  the  entire  area  when
probing  behind  walls.

These  preventative

measures  will  reduce  the  risk  of  explosion,
electric shock and property damage,

Do  not  use  this  device  for  personal
inspection or medical use in any way. This
is  not  a  medical  device.

Serious  personal

injury could result.

Do  not  place  the  inspection  camera
anywhere  that  may  contain  moving  parts.

This reduces the risk of entanglement injuries.

Always use appropriate personal protective
equipment  while  handling  and  using  the
inspection  camera.  Appropriate  personal
protective  equipment  always  includes
safety glasses and gloves and may include
equipment  such  as  latex  or  rubber  gloves,
face  shields,  goggles,  protective  clothing,
respirators  and  steel  toed  footwear.

Drains

and  other  areas  may  contain  chemicals,
bacteria  and  other  substances  that  may  be
toxic, infectious, cause burns or other issues.

Practice  good  hygiene.  Use  hot,  soapy
water  to  wash  hands  and  other  body  parts
exposed to drain contents after handling or
using  the  inspection  camera  to  inspect
drains  and  other  areas  that  may  contain
chemicals or bacteria. Do not eat or smoke
while  operating  or  handling  the  inspection
camera.

This  will  help  prevent  contamination

with toxic or infectious material.

Do  not  operate  the  inspection  camera  if
operator  or  device  is  standing  in  water.

Operating  an  electrical  device  while  in  water
increases the risk of electrical shock.

Do  not  use  this  device  for  personal
inspection or medical use in any way.

This is

not  a  medical  device.  Serious  personal  injury
could result.

Do not use the cable to clear clogs or move
obstructions.

This is not a drain cleaner.

Do  not  immerse  the  handle  or  the  display
unit  in  water.  The  imager  head  and  the
cable  are  water  resistant  when  the  unit  is
fully  assembled,  but  the  video  display  is
not.

Such measures reduce the risk of electric

shock and damage.

Battery/Charger

Before 

using 

battery

charger, read all instructions

and  cautionary  markings  on  (1)  battery
charger,  (2)  battery  pack,  and  (3)  product
using battery.

Use  only  the  charger  which  accompanied
your  product  or  direct  replacement  as
listed in the catalog or this manual.

Do not

substitute  any  other  charger.  Use  only  Bosch
approved  chargers  with  your  product.  See
Functional Description and Specifications.

Do not disassemble charger or operate the
charger  if  it  has  received  a  sharp  blow,
been dropped or otherwise damaged in any
way.  Replace  damaged  cord  or  plugs
immediately. 

Incorrect reassembly or damage

may result in electric shock or fire.  

Do  not  recharge  battery  in  damp  or  wet
environment. Do not expose charger to rain

or  snow.  If  battery  case  is  cracked  or
otherwise  damaged,  do  not  insert  into
charger.

Battery short or fire may result. 

Charge only Bosch approved rechargeable
batteries. 

See  Functional  Description  and

Specifications. Other  types  of  batteries  may
burst causing personal injury and damage.

Charge battery pack in temperatures above
+32  degrees  F  (0  degrees  C)  and  below
+113 degrees F (45 degrees C).  Store tool
and  battery  pack  in  locations  where
temperatures will not exceed 120 degrees F
(49  degrees  C).

This  is  important  to  prevent

serious damage to the battery cells.

Battery  leakage  may  occur  under  extreme
usage  or  temperature  conditions.  Avoid
contact  with  skin  and  eyes.

The  battery

liquid  is  caustic  and  could  cause  chemical
burns to tissues. If liquid comes in contact with

!

WARNING

!

WARNING

BM 2610012409 02-11:BM 2610012409 02-11  2/7/11  7:14 AM  Page 3

Содержание PS90

































Отзывы: