18
| English
2 609 000 229 | (19.1.09)
Bosch Power Tools
Mounting/Replacing the Application
Tool/Accessory
If required, remove an already mounted appli-
cation tool/accessory.
For removing the application tool/accessory
loosen the screw
8
with the allen key
9
and
remove the tool.
Mount the application tool/accessory (e.g.
plunge cut saw blade
7
) in such a way on the
tool holder
6
that the openings of the tool en-
gage into the cams of the tool holder.
For a safe and fatigue-free working position it is
possible to position the application tools/acces-
sories in any snap-in positions on the tool hold-
er. Position the tool in such a way that the de-
pressed centre points downwards (marking on
the tool is readable from above, see figure on
the graphics page).
Use the screw
8
to fasten the application
tool/accessory. Tightly fasten the screw
8
with
the allen key
9
.
f
Check the tight seating of the application
tool/accessory.
Incorrect or not securely fas-
tened application tools/accessories can come
loose during operation and pose a hazard.
Mounting/Replacing a Sanding Sheet on the
Sanding Plate
The sanding plate
10
is fitted with Velcro back-
ing for quick and easy fastening of sanding
sheets with Velcro adhesion.
Before attaching the sanding sheet
11
, free the
Velcro backing of the sanding plate
10
from any
debris by tapping against it in order to enable
optimum adhesion.
Position the sanding sheet
11
flush alongside
one edge of the sanding plate
10
, then lay the
sanding sheet onto the sanding plate and press
firmly.
To ensure optimum dust extraction, pay atten-
tion that the punched holes in the sanding sheet
match with the holes in the sanding plate.
To remove the sanding sheet
11
, grasp it at one of
the tips and pull it off from the sanding plate
10
.
You can use all sanding sheets, fleece pads/pol-
ishing cloth pads of the Delta 93 mm series of
Bosch accessory program.
Sanding accessories, such as fleece pads/pol-
ishing cloth pads, are attached to the sanding
plate in the same manner.
HM-Riff delta
plate
Mortar, concrete
remainders, wood,
abrasive materials
Rasping and sanding on hard surfaces;
Example: Removing mortar or tile adhesive
(e.g. when replacing damaged tiles)
Scraper, rigid Carpets, coverings
Scraping on hard surfaces;
Example: Removing carpet and tile adhesive
Accessory
Material
Application
OBJ_BUCH-345-005.book Page 18 Monday, January 19, 2009 2:49 PM
