English |
17
Bosch Power Tools
2 609 000 229 | (19.1.09)
Assembly
Changing the Tool
f
Before any work on the machine itself, pull
the mains plug.
f
Wear protective gloves when changing
application tools/accessories.
Contact
with the application tool/accessoriy can
lead to injuries.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found
in the extensive Bosch accessories program.
Accessory
Material
Application
BIM segment
saw blade
Wooden materials,
plastic, non-ferrous
metals
Separating and plunge cuts; also for sawing
close to edges, in corners and hard to reach
areas;
Example: shortening already installed bottom
rails or door hinges, plunge cuts for adjusting
floor panels
Base plate for
sanding, series
Delta 93 mm
Depends on sanding
sheet
Sanding surfaces close to edges, in corners
or hard to reach areas;
Depending on the sanding sheet for, e.g.,
sanding wood, paint, varnish, stone
HCS plunge
cut saw blade,
wood
Wooden materials,
soft plastics
Separating and deep plunge cuts; also for
sawing close to edges, in corners and hard
to reach areas;
Example: narrow plunge cut in solid wood
for installing a ventilation grid
HCS plunge
cut saw
blades, wood
Wooden materials,
soft plastics
Smaller separating and plunge cuts;
Example: Cut-outs in furniture for cable
connections
BIM plunge
cut saw
blades, metal
Metal (e.g., nails,
screws, small pro-
files), non-ferrous
metals
Smaller separating and plunge cuts;
Example: Shortening narrow profiles, cutting
fastening elements such as staples
HM-Riff
segment saw
blade
Grouting joints, soft
wall tiles, glass-fi-
bre reinforces plas-
tic and other abra-
sive materials
Cutting and separating close to edges, in
corners or hard to reach areas;
Example: Removing grouting joints between
wall tiles for repair work, cutting openings in
tiles, gypsum boards or plastic
OBJ_BUCH-345-005.book Page 17 Monday, January 19, 2009 2:49 PM
