Bosch PKS 16 Multi, Оригинальное руководство пользователя

Страница: 19 / 125

English | 19
u
Do not saw any ferrous metals. Hot chips may ignite the
dust extractor.
u
Always wait until the power tool has come to a com-
plete stop before placing it down.
The application tool
can jam and cause you to lose control of the power tool.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for making straight cuts in wood
with and against the grain, while resting firmly on the work-
piece. With suitable saw blades, you can also saw thin-
walled non-ferrous metals or plastic, such as profiles. With
suitable diamond cutting discs, you can cut tiles without us-
ing water.
The power tool must not be used to cut ferrous metals.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off switch for on/off switch
(2) On/off switch
(3) Base plate
(4) Unlocking lever for base plate
(5) Slider for preselecting the cutting depth
(6) Protective guard
(7) Viewing window for "Cut Control"
(8) Screw for setting the cutting depth
(9) Dust extraction adapter
(10) Auxiliary gripping surface (insulated)
(11) Handle (insulated gripping surface)
(12) Spindle lock button
(13) Mounting flange
(14) Circular saw blade
(15) Clamping bolt with clamping flange
(16) Hex key
(17) Dust extraction hose
a)
(18) Pair of screw clamps
a)
(19) 0° cut mark
(20) Chip ejector
(21) Diamond cutting disc
a)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Hand-held circular saw PKS 16 Multi
PKS 1600 Multi
Article number 3 603 CB3 0..
Rated power input W 400
No-load speed min
-1
6400
Base plate dimensions mm 68 x 233
Max. cutting depth mm 16
Max. saw blade diameter mm 65
Min. saw blade diameter mm 65
Max. tooth thickness/offset mm 2.0
Min. tooth thickness/offset mm 0.8
Max. diamond cutting disc
diameter mm 65
Working with a diamond cutting disc
– Min. cutting disc thick-
ness
– Max. cutting disc thick-
ness
mm
mm
0,6
1,2
Max. base blade thickness mm 1.2
Locating bore mm 15
Weight according to
EPTA-Procedure 01:2014 kg 1.9
Protection class / II
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-5 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
83 dB(A); sound power level
94 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 62841-2-5 :
Sawing wood: a
h
= 2.5 m/s
2
, K = 1.5 m/s
2
Sawing metal: a
h
= 2.5 m/s
2
, K = 1.5 m/s
2
Noise emission values determined according
to
EN 60745-2-22 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
97 dB(A); sound power
level 108 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-22 :
Cutting tiles: a
h
= 2.5 m/s
2
, K = 1.5 m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
Bosch Power Tools 1 609 92A 66T | (22.12.2020)