English–1
3 609 929 854 • (02.01) T
Switch-on actions cause brief drops in the mains volt-
age. For unfavourable mains conditions, interference
with other equipment can occur.
For mains impedance of less than 0.36
Ω
, no interfer-
ence can be expected.
The machine is intended for the free-hand sawing of
wood, plastic and light building materials. It is suitable
for straight and plunge cuts. The saw blade recom-
mendations are to be observed.
1
Sword
2
Loop handle
3
Stroke rate regulator
4
Switch-on lock
5
On-off switch
6
Channel for dust extraction
7
SDS release button
8
Catch for the dust extractor
9
Saw blade protector
10
Saw blades
11
Saw blade guide
12
Locking pin
13
Engaging pin 1
14
Engaging pin 2
15
Knob for the sideways sliding of the loop handle
16
Spacer tube
17
Knob for adjusting the inclination of the loop
handle
18
Bolt
Not all the accessories illustrated or described are in-
cluded in standard delivery.
Measured values determined according to EN 50 144.
The A-weighted noise levels of the tool are typically:
Sound pressure level: 91 dB(A)
Sound power level: 104 dB(A)
Wear ear protection!
The typical weighted acceleration is 4.0 m/s
2
.
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
In addition, the general safety
notes in the enclosed booklet must
be observed.
Before using for the first time, ask
for a practical demonstration.
Wear ear protection to prevent damage
to your hearing.
Wear safety glasses, protective gloves
and sturdy shoes.
■
If the cable is damaged or cut through while work-
ing, do not touch the cable but immediately pull the
mains plug. Never use the machine with a dam-
aged cable.
■
Connect machines that are used outdoors by
means of a fault current protection switch (FI) with
a maximum triggering current of 30 mA. Use only
an extension cable that is approved for outdoor
use.
■
Always direct the cable to the rear away from the
machine.
■
Working with material containing asbestos is not
permitted.
■
Always switch the machine off and wait until it has
come to a standstill before placing it down.
■
Put on the saw blade protector when laying down
the saw.
■
Keep children away from the machine.
■
Never allow children to use the machine.
■
Bosch is able to ensure perfect functioning of the
machine only if the original accessories intended
for it are used.
Product Specifications
Power Hand Saw
PFZ 1400 AE
Order number
0 603 308 6..
Rated power consumption
[W] 1400
Stroke rate
[RPM] 850 ... 2600
Stroke
[mm] 50
Blade length
[mm] 300
Weight (without
accessories) approx.
[kg] 5.0
Protection class
/
II
Intended Use
Product Elements
Noise/Vibration Information
For Your Safety
pfz_gb_3609929854_t.fm Seite 1 Freitag, 18. Januar 2002 11:38 11