background image

8

Important: 

The use of a cooktop leads to the production of heat and 

moisture in the kitchen. For this reason make sure that the 

room is properly ventilated. Keep natural ventilation openings, 

such as windows, open or provide a mechanical ventilation 

device (e.g. a range hood or overhead exhaust fan). An orangy 

flame is normal and simply indicates the presence of salt in the 

atmosphere (from cooking). If the flame has yellow patches, 

this is not a fault (of any kind).

Cooking recommendation

Cooking pans

Suitable pans

The chart below gives the correct pan usage for each burner. 

The pans should not exceed the cooker edge in any case

.

Precautions for use

The following advice is intended to help you save energy and 

prevent pan damage:

Cleaning and maintenance

Cleaning

Once the appliance is cool, use a sponge to clean it with soap 

and water.
After each use, clean the surface of the respective burner parts 

once they have cooled down. If any residue is left (baked-on 

food, drops of grease etc.), however little, it will become stuck 

to the surface and more difficult to remove later. The holes and 

grooves must be clean for the flame to ignite properly. 
The movement of some pans may leave metal residue on the 

pan supports.
Clean the burners and pan supports using soapy water and 

scrub with a non-wire brush.
If the pan supports are fitted with rubber rests, ensure that 

these are also cleaned. The rests may come loose and the pan 

support may scratch the hob.
Always dry the burners and pan supports completely. Water 

droplets or damp patches on the hob at the start of cooking 

may damage the enamel.
After cleaning and drying the burners, make sure the burner 

caps are correctly positioned on the diffuser.

Caution!

Do not use steam cleaners. This could damage the hob.

Maintenance

Always clean off any liquid as soon as it is spilt. This will 

prevent food remains from sticking to the hob surface and you 

will save yourself any unnecessary effort.
Do not leave acidic liquids (e.g. lemon juice, vinegar, etc.) on 

the hob.
Due to the high temperatures endured, the wok burner and the 

stainless steel zones (grease drip tray, burner outline, etc.) can 

change colour. This is normal. After each use, clean these 

areas with a product that is suitable for stainless steel.
It is recommended that the cleaning product available from our 

Technical Assistance Service (code 464524) is used regularly.

Burner

Very high - High Medium

Low

Wok burner

Boiling, steam-

ing, griddling, 

toasting, paellas, 

Asian food (wok).

Reheating and keeping 

things hot: cooked and pre-

cooked dishes

Semi-rapid 

burner

Steamed pota-

toes, fresh vege-

tables, vegetable 

stews, pasta

Reheating, keeping things 

hot and making tasty casse-

roles

Auxiliary 

burner

Cooking: casse-

roles, rice pud-

ding, caramel

Defrosting 

and slow 

cooking: veg-

etables, fruit 

and frozen 

products

Melting: but-

ter, choco-

late, jelly

Do not place anything, eg. flame 

tamer, asbestos mat, between 

pan and pan support as serious 

damage to the appliance may 

result.

Do not remove the pan support 

and enclose the burner with a 

wok stand as this will 

concentrate and deflect heat 

onto the hotplate.

Do not use large pots or heavy 

weights which can bend the pan 

support or deflect flame onto the 

hotplate.

Burner

Minimum pan 

diameter

Maximum pan 

diameter

Wok burner

22 cm

-

Semi-rapid burner

14 cm

20 cm

Auxiliary burner

12 cm

16 cm

Use pans which are the right 

size for each burner.
Do not use small pans on 

large burners. The flame must 

not touch the sides of the pan.

Do not use damaged pans, 

which do not sit evenly on the 

hob. Pans may tip over.
Only use pans with a thick, flat 

base.

Do not cook without using a lid 

and make sure the lid is 

properly fitted. This wastes 

energy.

Always centre the pan over the 

burner, not to one side. 

Otherwise it could tip over.
Do not place large pans on the 

burners near the control knobs. 

These may be damaged by the 

very high temperatures.
Place the pans on the pan 

supports, never directly on the 

burner.
Make sure that the pan 

supports and burner caps are 

correctly positioned before 

using the appliance.
Pans should be placed on the 

hob carefully.
Do not strike the hob and do 

not place excessive weight on 

it.

Содержание PBH615B9TA












Отзывы: