|
OBD 1100
| Operating instructions | 9
en
574114 REV B | 08.2018
Bosch Automotive Service Solutions
Since DTCs Cleared - shows
status of the monitors since
the DTCs were last erased .
This Drive Cycle - shows
status of monitors since the
start of the current drive
cycle . Refer to the vehicle
service manual for more
detailed information on
emission-related monitors
and their status .
9
Some vehicles do not sup-
port This Drive Cycle . If
vehicle supports both types
of monitors the I / M Monitors
Menu displays .
View Freeze Data
Displays a snapshot of operat-
ing conditions at the time the
Diagnostic Trouble Code was
created. See PID Definitions for
more information .
VIN
The VIN function allows the
tool to request the vehicle’s
VIN number.
The VIN function applies to
model year 2000 and newer OBD
II compliant vehicles .
System Setup
System Setup allows:
• Display contrast to
be changed
• Tool information to be viewed
• Display to be checked
• Operation of the keypad to
be checked
• Memory of the Tool to
be checked
• Units of measure to
be changed
View Data
The View Data function allows
real time viewing of the vehicle’s
computer module’s PID data .
As the computer monitors the
vehicle, information is simultane-
ously transmitted to the Tool .
View Data allows the following
items to be viewed on the Tool:
Sensor data
Operation of switches
Operation of solenoids
Operation of relays
Multiple PIDs may be sent if vehi-
cle is equipped with more than
one computer module (for exam-
ple a powertrain control mod-
ule [PCM] and a transmission
control module [TCM] . The Tool
identifies them by their iden-
tification names (ID) assigned
by manufacturer (i .e . $10 or
$1A). See PID Definitions for
more information .
