Bosch NKC8 17 Series, Инструкция по эксплуатации

Страница: 11 / 16

11
Changing the basic settings
The hob must be switched off.
1.
Switch on the front left hotplate at heat setting 1.
2.
Within the next 10 seconds, touch the ð symbol for
4 seconds.
™
and
‚
flash alternately in the left-hand display;
‹
lights up in
the right-hand display.
3.
Touch the ð symbol repeatedly until the desired indicator
appears in the left-hand display.
4.
Touch the
+
or
-
symbol repeatedly until the desired setting
appears in the display.
5.
Touch the
ð
symbol for 4 seconds.
The setting is activated.
6.
Switch off the hotplate.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass ceramic.
Follow the cleaning instructions on the packaging.
Never use:
■
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■
Harsh cleaning agents such as oven spray or stain remover
■
Abrasive sponges
■
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Using special sponges to clean glass ceramic achieves great
cleaning results.
Hob surround
To prevent damage to the hob surround, observe the following
instructions:
■
Use only hot soapy water.
■
Wash new sponge cloths thoroughly before use.
■
Do not use any sharp or abrasive agents.
■
Do not use the glass scraper.