Bosch NGP Series, Руководство по установке

Страница: 5 / 32

English 3
Before You Begin
Tools and Parts Needed
1) Phillips Head Screwdriver
2) Drill with 1/4” (6.35mm) bit
3) Tape Measure
Parts Included
1) Foam tape
2) Hold down brackets (4)
3) Screws, #10-32 x 2 1/2” (63.8mm) (4)
4) Sheet Metal Screws, #8 x 3/8” (9.5mm) (4)
5) Washers (4)
6) Rubber Grate Foot (1 extra foot is included for future use if required)
7) Burner Grates
30” models: (2)
36” models (3)
8) Burner Caps
30” models: (4)
36” models: (5)
9) Regulator
If parts are missing or damaged, call the number or write to the address listed
inside the cover.
General Information
Overall Dimensions
Preparation
Electrical Requirements This appliances requires a 60 Hz, 15 Amp, 120 VAC connection. Plan the installa-
tion so that the power connection is accessible from the front of the cabinet.
Gas Requirements Supply Pressure:
Installation
Table 1: Overall Dimensions
30” Models 36” Models
Width
(Side to Side)
31” (787.4 mm) 37” (939.8 mm)
Depth
(Front to Back)
21” (533.4 mm) 21” (533.4 mm)
Height
(Top to Bottom)
4” (Below Countertop) 4” (Below Countertop)