![Bosch NGM8657UC Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/bosch/ngm8657uc/ngm8657uc_installation-manual_40217012.webp)
12
4.
Important:
Attach the metallic sticker (included with
this conversion kit) to the bottom of the appliance as
shown, placing it near the appliance data plate (shows
model number and information about the appliance).
This sticker provides notice that the appliance has
been converted for use with LP gas.
Replacing the Nozzles
Replacing the nozzles
1.
Remove all burner grates, burner caps and burner
bases.
2.
To replace the nozzles, use a 7 mm socket wrench.
See table. It is important to make sure that the nozzles
do not become detached during removal or fastening.
They must be properly tightened to ensure that there
are no leaks.
With these burners, there is no need to adjust the
primary air.
3.
Fasten the nozzles and attach the burner caps to the
corresponding burners. Put the burner grates in place
on the corresponding burners.
4.
Attach the sticker indicating the new gas type close to
the rating label.
Save the nozzles removed from the appliance for
future use. If you change the type of gas back to
Natural Gas at a later point, remove the sticker.
Adjusting the Gas Valves
1.
Turn the control knobs to the lowest setting.
2.
Remove the control knobs from the gas valves and
remove the white ring that is underneath.
A flexible black rubber sealing ring will be visible.
Below the left upper position of that seal, there is a
visible black Star T10 screw, partly hidden by the seal.
Press the rubber seal aside a bit to meet the screw
with a long thin T10 screwdriver. The dual-flame
burner has 2 setting screws.
Never remove the sealing ring.
Sealing rings prevent
liquids and dirt from finding their way into the
appliance and impairing its ability to function properly.
3.
See the following chart for the setting of the gas
valve’s setting screws (M):
A:
LP Gas- The gas valve’s setting screws must be
tightened properly.
B:
Natural Gas- The gas valve’s setting screws must
finish flush with the fitting.
Make sure the flame does not go out and there are no
flashbacks when you turn the control knob between
the highest and lowest setting.
Never remove the valve stem. In the event of damage,
the gas valve must be completely replaced.
21/<)2586(:,7+87,/,6(56(8/(0(17$9(&'886262/2&21
3523$1(*$6
3523$1(3523$12
'21275(029(7+,6/$%(/817,/7+($33/,$1&(+$6%((1
,167$//('$1'7(67('72%(,167$//('21/<%<$1
$87+25,6('3(5621
1(3$65(7,5(5&(77(e7,48(77($9$1748(/$3/$48(1(
62,7,167$//e((77(67e(1('2,7È75(,167$//e(48(3$5
3(56211($8725,6e(
(67$(7,48(7$12'(%(6(55(7,5$'$+$67$'(638e6'(68
,167$/$&,Ð1<&20352%$&,Ð1/$,167$/$&,Ð1'(%(6(5
5($/,=$'$Ô1,&$0(17(3253(5621$/$8725,=$'2
$
%
Содержание NGM8657UC
Страница 1: ...Installation Manual Gas Cooktop NGM8657UC ...