Bosch NEV 400 LSN, Руководство по установке

Страница: 32 / 44

32 en | Cabling
NEV 400 LSN Power
supply
2019-11 | 04 | F.01U.309.346 Bosch Security Systems B.V.
Figure 5.5: Tamper switch connection
5.4 Connecting the EMIL expansion module to
the power supply
For an overview of the cabling, refer to Cabling overview, page
29 .
1. Connect two wires to terminal 5 and 6 of the EMIL
expansion module.
2. Connect the other end of the two wires to the white
terminal block - + of the power supply.
3. Connect the terminal block with one wire of the prewired
cable supplied with the EMIL expansion module to terminal
35 of the EMIL expansion module.
4. Connect the terminal block with two wires of the prewired
cable to terminal 31 and 32 of the EMIL expansion module.
5. Connect the orange terminal block of the prewired cable to
the rightmost position on top of the power supply.
5.5 Connecting the auxiliary outputs
For an overview of the cabling, refer to Cabling overview, page
29 .
Connecting AUX 1 (28 VDC)
1. Connect two wires to B and R of the terminal block B of the
power supply
2. Use the other end of the wires as AUX output 1.