Bosch NET5466SC, Инструкция по использованию и уходу

Страница: 13 / 40

13
Changing or canceling the cook time
Select the cooking zone and touch the
0
symbol. The
x
indicator lights up. On the control panel, change the
cook time or set to
‹‹
.
Note:
You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to pre-select a cook time for all
cooking zones. Each time a cooking zone is turned on,
the pre-selected cook time then counts down. When the
cook time has elapsed, the cooking zone switches off
automatically.
You can find out how to turn on the automatic timer in the
Basic settings section.
Note:
You can change the cook time for a cooking zone
or switch off the automatic timer for the cooking zones.
Select the cooking zone and touch the
0
symbol. The
desired indicator
x
lights up. Change the cook time or
set to
‹‹
on the control panel.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
▯
If a cooking zone has been selected, touch the
0
symbol twice within 10 seconds.
▯
If a cooking zone has not been selected, touch the
0
symbol.
The
V
indicator lights up.
Setting the kitchen timer
Set the desired time on the control panel.
Once the time has elapsed
After the time has elapsed, you will hear an audible
signal.
‹‹
lights up in the timer display. The
V
indicator
for the kitchen timer lights up. After 10 seconds, the
indicator switches off.
Displaying the time
Use the
0
symbol to select the kitchen timer. The time is
displayed for 10 seconds.
Setting the correct time
Use the
0
symbol to select the kitchen timer and reset
the time.
Child lock
You can use the child lock to prevent children from
turning on the cooktop.
Turning the child lock on and off
The cooktop must be turned off.
To turn on: Touch the
D
symbol for approx. 4 seconds.
The indicator light above the
D
symbol lights up for
10 seconds. The cooktop is locked.
To turn off: Touch the
D
symbol for approx. 4 seconds.
The cooktop is unlocked.
Automatic child lock
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Clean lock
If you wipe over the control panel while the cooking zone
is turned on, settings may be altered.
To prevent this from happening, your cooktop has a
clean lock function. Touch the
- D
symbol. A signal
sounds and the indicator light above the
- D
symbol
lights up. The control panel is locked for 30 seconds.
You can now wipe over the control panel without altering
any settings.
Note:
The main switch is excluded from the clean lock
function. You can turn off the cooktop at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
”‰
and the residual heat
indicator
•
/
œ
flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).