Bosch MUMX25TLCN, Инструкция по эксплуатации, Страница: 19 / 34

19
en Bowl and tools
■ Press the Release button and
move the multi-function arm to
position 2 .
■ Check the height of the whisk and, if
required, correct.
■ When the height has been set
correctly, press the release
button and move the multi-
function arm to position
1
.
■ Hold whisk in place and tighten nut
anti-clockwise using enclosed key.
Working with the bowl and
the tools
Figure
E
:
■ Press the Release button and
move the multi-function arm to
position 1 .
■ Cover unused drives with drive covers.
■ Insert the bowl:
– Tilt the bowl forwards and then set it
down.
– Turn anti-clockwise until it locks into
place.
■ Depending on the processing task, insert
the stirrer, whisk or kneading hook firmly
into the drive until it locks into position.
Note:
If using the kneading hook, first insert
dough deflector, then the kneading hook
(Fig.
E
-4b) .
Note shape and position of the parts.
■ Put the ingredients to be processed into
the bowl.
■ Press release button and move
multi-function arm to position 2 .
■ Attach the cover.
■ Insert the mains plug.
■ Set the rotary switch to the desired
setting.
Our recommendation:
– Stirrer:
First mix at setting 1-2,
then setting 3-7 as required
– Whisk:
setting 7, mix in at setting 1
– Kneading hook:
first stir in at setting 1,
knead at setting 3
Adding more ingredients
■ Switch off the appliance with the rotary
switch.
■ Attach funnel (Fig.
E
-7) .
■ Top up ingredients through the funnel.
or
■ Remove lid.
■ Press release button and move
multi-function arm to position
1
.
■ Add ingredients.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Remove mains plug.
■ Remove lid.
■ Press release button and move
multi-function arm to position 1 .
■ Take the tool out of the drive.
■ Remove the bowl.
■ Clean all parts, see “Cleaning and
servicing”.
Blender
W Risk of injury from sharp blades /
rotating drive!
Never place fingers in the attached blender!
Do not remove / attach the blender until
the drive is at a standstill! Do not switch on
the appliance until the blender has been
screwed in all the way and the tool drive
cover (7) has been attached.
W Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a max.
0.75 litres of hot or frothing liquid.
Warning!
Operate the blender in the indicated oper-
ating position only. Operate the assembled
blender only and with the lid attached. Lid
must be locked correctly. Do not operate
blender when empty.