Bosch MUM9 GB Series, Инструкция по эксплуатации

Страница: 16 / 108

16
en Preparation
Preparation
■ Place the base unit on a smooth, clean
and stable surface.
■ Pull the power cord out to the required
length.
■ Press the release button and raise
the swivel arm to the stop.
■ Place the cover with the filling shaft at
the front on the main drive.
■ Insert the bowl. When doing so, use the
recesses on the base unit.
■ Turn the bowl anticlockwise until it locks
into place.
The base unit is prepared for further use.
Important: Do not slide the appliance about
on the work surface as this may impair
the functioning of the scales. To move the
appliance, lift it.
Settings
■ Press the release button and push the
swivel arm down until it locks into place.
■ Plug the mains plug into the mains.
The appliance is switched on.
■
“OptiMUM”
appears on the display.
Note: If the appliance is not used or
operated within a certain period, the display
will slowly fade and switch to standby
mode.
“OptiMUM”
will appear once again
when any button is touched.
■ Press and hold buttons
A
and
+
at the
same time until the configuration menu
is opened.
■ Release buttons
A
and
+
again.
Selecting setting
■ The following settings appear in
sequence each time button
A
is briefly
pressed:
–
LANGUAGE
Language in which the display texts are
displayed.
–
SOUND
Volume of the acoustic signals – setting
in 6 levels from off to loud.
–
BRIGHTNESS
Brightness of the display – setting in
6 levels from dark to bright.
–
UNITS
(for models with scales)
Unit of display for the scales – grams (
g
)
or pounds (
lb
).
Changing and saving settings
■ The current setting is changed using the
button
+
or
-
.
■ Press and hold buttons
A
and
+
simultaneously until
“SETUP SAVED”
briefly appears on the display.
■ Release buttons
A
and
+
again.
The changed settings are saved.
Example: Setting the language
X see also quick reference guide
■ Press and hold buttons
A
and
+
at the
same time until the configuration menu
is opened.
■ Release buttons
A
and
+
again.
■ Keep pressing button
A
until the
language selection appears.
LANGUAGE
ENGLISH
■ Press the button
+
or
-
repeatedly
until the desired language is displayed.
■ Press and hold buttons
A
and
+
simultaneously until
“SETUP SAVED”
briefly appears on the display.
SETUP
SAVED
■ The language selection is shown on the
display.
■ Release buttons
A
and
+
again.
The language selection is saved.
■ Hold down one of the function buttons
(
D
/
A
/
C
) until
“OptiMUM”
appears on
the display. The appliance is ready to
use.
Note: If the appliance is switched on
with the rotary switch, the menu is exited
immediately.