20
en
Cleaning and servicing
Note:
If the food to be processed sticks in
the continuous-feed shredder, switch food
processor off, pull out mains plug, wait until
the drive comes to a standstill, remove
cover from the continuous-feed shredder
and empty feed tube.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■
Rotate the continuous-feed shredder in
an anti-clockwise direction and remove.
■
Rotate the lid in an anti-clockwise
direction and remove.
■
Remove disc holder with disc. To do this,
press finger from below against the drive
shaft
(Fig.
H
)
.
■
Clean parts.
Cleaning and servicing
The attachments and accessories used
must be thoroughly cleaned after each use.
Attention!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W
Danger of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■
Remove mains plug.
■
Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■
Then dry the base unit.
Cleaning the bowl and tools
The bowl and tools are dishwasher-
proof. Do not wedge plastic parts in the
dishwasher, as they could be permanently
deformed during the washing process!
Cleaning the continuous-feed
shredder
W
Risk of injury from sharp blades!
Do not grip the sharp blades or edges of the
cutting discs. Clean them with a brush.
All parts of the continuous-feed shredder
are dishwasher-proof.
Tip:
To remove the red film after processing
e.g. carrots, pour a little cooking oil on a
cloth and rub the film off the continuous
feed shredder (not the cutting discs). Then
rinse the continuous-feed shredder.
Important information
If required, clean accessories bag. Follow
care instructions in the bag.
Storage
W
Risk of injury!
When the appliance is not in use, pull out
the mains plug.
Fig.
J
:
■
Store tools and cutting discs in the
accessories bag.
■
Keep accessories bag in the bowl.
Troubleshooting
W
Risk of injury!
Before eliminating a fault, pull out the mains
plug.
Important information for
MUM54../MUM58..
The Operating indicator flashes if the
appliance has been operated incorrectly
or the electronic fuse has tripped or the
appliance is defective.
The swivel arm must be engaged in
every operating position.
Initially try to eliminate the problem which
has occurred with the help of the following
information.
Fault
Appliance does not start.
Remedial action
■
Check the power supply.
■
Check the mains plug.
■
Check swivel arm. Correct position?
Engaged?
■
Screw on blender or bowl as far as
possible.
