Preparation
-4-
DIGITAL MULTI-DETECTOR DMD4
Article number
3 601 K10 010
Maximum scanning depth*:
Ferrous metals
4" / 100 mm
Non-ferrous metals (copper)
3-1/8" / 80 mm
Copper wiring (live)
2" / 50 mm
Wood Substructures (studs)
3/4" / 20 mm
Automatic switch-off
After approx. 5 min
Operating temperature
14 °F 122 °F
–10 °C +50 °C
Storage temperature
– 4 °F –158 °F
–20 °C +70 °C
Battery
1 x 9 V 6LR61
Rechargeable battery
1 x 9 V 6F22
Operating lifetime (alkali-manganese batteries)
Approx. 6 h
Weight according to EPTA-Procedure 01/2003
0.53 lbs/ 0.24 kg
* Depends on material and size of objects as well as material and condition of structure.
** Less scanning depth for wires/conductors that are not “live”.
Please observe the article number on the type plate of your multi-detector.
Technical Data
INSERTING/REPLACING THE BATTERY
Use only alkali-manganese or rechargeable
batteries.
To open the battery lid
10
, press the latch
12
in the direction of the arrow and fold up the
battery lid. Insert the supplied battery. Pay
attention that the polarity is correct, according
to the + and - symbols on the inside of the
battery lid.
• When the battery indication
k
in the display
lights up, measuring is possible for approx. 1
h when using alkali-manganese batteries
(service life is shorter with rechargeable
batteries).
• When the battery indication
k
flashes,
measuring is still possible for approx. 10
minutes.
• When the battery indication
k
and the
illuminated ring
1
(red) are flashing,
measuring is no longer possible and the
battery or the rechargeable battery
respectively, must be replaced.
•
If the multi-detector is not used for a long
period of time, the battery must be
removed.
The battery can corrode or
discharge itself over long periods.
BM 2609140574 08-08 9/3/08 8:40 AM Page 4
