Bosch MTS 5200 LAB SCOPE Скачать руководство пользователя страница 77

Страница: 77 / 80

Presented by Bob Pattengale

BOSCH MTS 5200 LAB SCOPE

1-800-71-TRAIN (1-800-718-7246) OR www.auto-video.com

MTS 5200 FAQ’S

Shop Foreman Pro can be downloaded free of charge at:

http://www.boschdiagnostics.com/software/diagnosticssoftware/pages/software.aspx?type=un

derhood

From there make sure that you choose “MTS 3100 Mastertech” from the drop down menu.

Where To Find Shop Foreman Pro

Click on the “Shop_Foreman_Pro_5.7.11.0.exe” link and follow the prompts on the screen to

install it to your PC.

Battery Life

The battery in the MTS 5200 was never designed to last for hours. The purpose of the battery

was just in case you had lost connection to any main power source. At best you will get 30

minutes of battery power allowing you to get reconnected and not losing any data.

Be sure to exercise the battery as we discussed at the beginning of the presentation. This will

help to extend the life of the battery but you still won’t get hours of life.

Содержание MTS 5200 LAB SCOPE

















































































Результаты поиска

Содержание MTS 5200 LAB SCOPE

Отзывы:

Bosch MTS 5200 LAB SCOPE, Руководство пользователя, Страница: 77 / 80

Результаты поиска

Содержание MTS 5200 LAB SCOPE

Отзывы: