42
Presented by Bob Pattengale
BOSCH MTS 5200 LAB SCOPE
1-800-71-TRAIN (1-800-718-7246) OR www.auto-video.com
NAVIGATING THE MTS 5200 (CONTINUED)
Analyzer Utilities (Setup)
SET DATE AND TIME
The MTS 5200 utilizes a date and time function in memory as part of its software function. Date
and time are used to put a time stamp on files that are recorded and saved. To set the time and
date, simply touch the Set Date and Time button, bringing up the Set Date/ Set Time menu.
Touch the month and you will notice that fonts start to blink on and off. Touch the < > to move
forward or backward one month at a time, or you can touch the << >> to make larger jumps
forward or backward. All the settings in the Date/Time function follow the same procedure.
When you have finished the setup, touch the Save button to save the settings to memory.
Touching the Revert button will set the Time/Date function back to the original setting when the
unit was powered up. Once you have set the date and time, press the EXIT keypad button to
return to the Setup menu.
SELECT LANGUAGE
The Select Language option displays the available languages in a list box, on which you select
the desired language by touching its name. Once you select a language, the analyzer continues
to display that language, even after the tester is turned off and back on, until another is selected.
CONFIGURE NETWORK IP ADDRESS
The IP Address and the IP Mask are used for configuring Shop Foreman.
MEASUREMENTS AND SETTINGS
The Measurements and Settings screen allows you to select Units of Measure and settings for
the Cranking Test and the Ignition Disable Duration.