Bosch MicroDome NDC-274-PT, Руководство по установке

Страница: 18 / 28

18 en | Installation MicroDome Camera 200 Series
AR18-10-B012 | v1.55 | 2012.09 Installation Manual Bosch Security Systems
3.7.1 Camera positioning
The camera module position can be adjusted along two axes.
When adjusting the camera position ensure that the picture
display on the monitor is level.
Set the camera to the desired position by performing the
following steps:
1. For horizontal adjustment (pan) rotate the camera module
in the base. Do not rotate more than 350°.
2. For vertical adjustment (tilt) rotate camera. Do not rotate
more than 55°.
CAUTION!
The image sensors are highly sensitive and require special care
for proper performance and extended lifetime. Do not expose
them to direct sunlight or bright spotlights in operating and
non-operating conditions. Avoid bright lights in the field of view
of the camera.