Bosch LTC 8555 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 32

background image

LTC 8555 Series |

Instruction Manual

|

Installation

EN

| 17

Bosch Security Systems | 29 August 2003

The modem on the Allegiant side must be set to an

auto answer

mode, and the modem on the keyboard side must be

set to an

originate

mode. In some cases, modem settings are configured via dipswitches found on the back of the

modem. In other cases, the modem must be connected to a PC for configuration. The below settings represent the
dipswitch configuration required for US Robotics Sportster modems.

5.3.5

Console Expander Configuration When Using RS-232 Model Keyboards

RS-232 model keyboards may be connected to an Allegiant system using the LTC 8712 Series Console Port
Expander, as shown in Figure 8. An LTC 8712 Series Console Port Expander can be configured to support up to four
RS-232 Keyboard connections. Other devices, such as a PC running the Allegiant Master Control software, can be
connected to the unused ports of the Port Expander. Because the Port Expander supports only a single baud rate for
the external connections, and the RS-232 keyboards require 9600 baud, all external devices connecting to the Port
Expander must be configured to for operation at this setting.

Figure 8: Configuration using LTC 8712 Series Console Port Expander

On Allegiant systems with a Printer port, up to two Console Port Expanders can be connected, supporting a total of
eight RS-232 model keyboards.

To configure an Allegiant system to operate with an LTC 8712 Console Port Expander, you must have access to the
Allegiant CPU’s dipswitches, the PC-based LTC 8059 Master Control Software, and possibly an Allegiant keyboard.

LTC 8712 Expander

Allegiant system main

CPU bay

Refer to text regarding setup of the Allegiant

& LTC 8712 to operate in Allegiant Keyboard

mode.

Junction box & power

adapter supplied with

LTC 8557 kit

User-supplied female
9-pin D connector.

3 m (10 ft) data/

power cable

supplied with

keyboard

User-supplied cable or other link

suitable for

full duplex RS-232 transmissions

at 9600 baud

Expander pin 2 (Rx) to Tx of link or directly to pin 3 of LTC 8557 box.
Expander pin 3 (Tx) to Rx of link or directly to pin 2 of LTC 8557 box.
Expander pin 7 (Gnd) to Data Gnd of link or directly to pin 1 of LTC 8557 box.

1

2

3

4

Allegiant side Modem

Keyboard side Modem

Dip Switch

Setting

Modem Function

Dip Switch

Setting

1

DOWN

DTR Override

1

DOWN

2

UP

Verbal Result Codes

2

UP

3

DOWN

Display Result Codes

3

DOWN

4

UP

Echo Offline Commands

4

UP

5

DOWN

Suppress Auto Answer

5

UP

6

DOWN

Carrier Detect Override

6

UP

7

DOWN

Load Factory Defaults

7

DOWN

8

DOWN

Smart Mode

8

DOWN

«
...
30
31
32

Содержание LTC 8555

































Отзывы:

Нет отзывов

Похожие инструкции для LTC 8555

Бренд: CAME Страницы: 12

Бренд: CAME Страницы: 16

Бренд: Ultrak Страницы: 41

Бренд: Zander Aachen Страницы: 10

SIGMA CONTROL 2

Бренд: KAESER KOMPRESSOREN Страницы: 246

Бренд: National Instruments Страницы: 40

Бренд: National Instruments Страницы: 28

Бренд: National Instruments Страницы: 7

Бренд: National Instruments Страницы: 22

Бренд: T&D Страницы: 2

Бренд: T&S Страницы: 5

Бренд: Ultratec Страницы: 33

Бренд: X-lander Страницы: 72

Бренд: X Rocker Страницы: 38

Бренд: Vaillant Страницы: 12

1020 CAN-RS232-RS422 MFL

Бренд: PENKO Страницы: 29

Бренд: Inkel Страницы: 12

Бренд: Euromatic Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды