Bosch LTC 8016/90, Инструкция по эксплуатации

Страница: 65 / 104

General Information
EN | 55
User Function 1 - Local Keyboard Test
User Function 1 can be used as a local test to ensure that all the keyboard LEDs and
switches are working.This function automatically calibrates the center position of the
analog joystick on LTC 8555 keyboards. Upon entering this test, the keyboard will
beep and all LEDs will light for about two (2) seconds. The USER should note if
there are any LED failures.
Each key may be pressed to display a unique code number associated with that key.
Follow the table below to ensure that all keys are properly being processed by the
keyboard. Push [
USER]
last, as this causes the keyboard to exit the test mode. If the
log-on system feature has been selected by the system installer, the same local test
may be initiated while the keyboard is not ON LINE by pressing * (STAR).
40 n/a n/a Reserved - - -
41 Select n/a Set Satellite Communication Format Y Y N N
42 Select n/a Keyboard log-in auto-off mode Y Y N N
43 n/a n/a CPU battery status Y Y Y
99 Select n/a Use functions index Y Y Y
Fn#
Joystick
Up/Down Joystick
Left/Right
Function Description
Pass-
word
Req.
Access Level
Key No.
IRIS UP 044
IRIS DOWN 045
FOCUS UP 042
FOCUS DOWN 043
ZOOM CLOCKWISE1 041
ZOOM COUNTERCLOCKWISE1 040
ALARM 004
USER 000
SEQUENCE 032
HOLD 036
RUN 033
PREVIOUS 035
NEXT 034
#1 010
#2 018
#3 026
#4 011
#5 019
#6 027
CAMERA 024
MONITOR 008
ACKNOWLEDGE 005
PROGRAM 002
SET 001
SHOT 009
OFF 025
ON 017
* (STAR) 016
LOCK 003
#7 012
#8 020