Photobeam 5000
Installing multiple sets (stacking) | en
31
3
12
3
4
12
4
12
3
2
7
1
12
6
R
T
T
R
R
T
T
R
5
Figure 7.6: Stacking in long distance (double stack)
Callout
﹘
Description
1
﹘
Second stack assigned to Channel 1
2
﹘
First stack assigned to Channel M
3
﹘
Receiver
4
﹘
Transmitter
5
﹘
Group B transmitter/receiver pairs
6
﹘
Synchro wiring
7
﹘
Group A transmitter/receiver pairs
Application
Using a double stack configuration provides a higher level of detection when you want to
secure a perimeter or an area such as a loading dock entrance of perimeter wall, and you need
a higher placement position.
In double stack configurations:
–
Each top set stack must be set for Channel M, and the bottom stack set to Channel 1 to
avoid crosstalk between top and botton stacks.
–
Set photobeams sets in the illustration above (callout 5), to Group B to avoid crosstalk
with sets assigned to Group A (callout 7).
–
Use Synchro wiring as illustrated in the graphic above.
7.4.3
Triple stack
Refer to the following graphic below for a triple stack example.
Bosch Security Systems, Inc.
Installation and Operation Guide
2016.02 | 03 | F.01U.303.478
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
Содержание ISC-FPB1-W120QF
Страница 2: ...Available from A1 Security Cameras www a1securitycameras com email sales a1securitycameras com ...
Страница 42: ...Available from A1 Security Cameras www a1securitycameras com email sales a1securitycameras com ...
Страница 43: ...Available from A1 Security Cameras www a1securitycameras com email sales a1securitycameras com ...
