manualshive.com logo in svg

Bosch INT-TX04, Руководство по эксплуатации, Страница: 52 / 94

Поделиться
Скачать
Bosch INT-TX04 Скачать руководство пользователя страница 52

Menu Item

Description

Transmitter Status

Shows the transmitter status (see section View transmitter
status, page 69)

1 Fault Status

Shows the radiator fault status (see section Fault messages, page
72)

2 Monitoring . . .

Go to the ‘Monitoring’ sub-menu (see section Integrus
Transmitter, page 66)

3 Enquiry . . .

Go to the ‘Enquiry’ sub-menu (see section Service requests, page
75)

4 Setup . . .

Go to the ‘Setup’ sub-menu (see sections Set transmission (4A),
page 52 and higher)

Set transmission (4A)

The Transmission menu item (4A) is used to select which signals will be distributed over the
channels. It is also possible to switch all channels off (Standby). When using an Integrus
system with a DCN Next Generation system (see section Set network mode (4B), page 52),
the transmitter is automatically switched to 'Standby' when the connected DCN Next
Generation system is switched off. When the DCN Next Generation system is switched on, the
transmitter is automatically switched to 'On'.

Menu Item

Options

Description

4A Transmission

Mode:

 

 

- Standby

All channels are switched off, no signals are
distributed.

 

* - On

Normal transmission. Input signals are
distributed on the channels as set in the
Channel Quality sub-menu (4D).

 

- Aux to All

The signals on the Auxiliary inputs are
distributed on one carrier to all channels.

 

- Test

A different test tone is distributed on each
channel. The frequency increases with
increasing channel number. For stereo
channels the tone for left and right will also
be different.

 

- Slave

The radiator signal on the slave input is
looped-through to all radiators.

Set network mode (4B)

The Network Mode menu item (4B) is used to enable the optical network connections. When
the transmitter is connected to a DCN Next Generation conference system, the optical
network connections must be enabled.

7.2.2

7.2.3

52

en | Configuration

Language Distribution System

2013.11 | V1.4 |

Operation manual

Bosch Security Systems B.V.

Содержание INT-TX04































































































Отзывы:

Нет отзывов