Bosch INT-TX04 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 94

Bosch INT-TX04 Скачать руководство пользователя страница 49

Navigate through the menu

4D Ch. Quality
Per Channel ...

main menu
item number

sub-menu
item character

three dots indicate
that the item has a
sub-menu

menu item title

4D Channel 12
Stereo PQ In 03

option values

Figure 7.2: Menu item screen elements

Operating the menu is always a sequence of alternating turns and pushes:
Turn the button to:
–

Cycle through the menu items within a menu (the menu item number and title on the first
line is blinking).

–

Go to a settable option within a menu item (a blinking cursor moves through the menu
screen).

–

Cycle through the available values for a settable option (the value is blinking).

Push the button to:
–

Confirm a chosen menu item (the menu item number and title stops blinking, a blinking
cursor appears).

–

Go to a sub-menu (the sub-menu item character starts blinking).

–

Confirm the selection of a settable option (the cursor disappears, the option value starts
blinking).

–

Confirm a selected value for a settable option (the value stops blinking, the cursor
appears again).

After 3 minutes of inactivity, the display automatically switches back to the first item of the
Main menu (Transmitter Status).
Each menu item is identified by a number (for the Main menu) or by a number plus a character
(for the sub-menus). The item identification can be found at the start of the first line and is
used to navigate to and from sub-menus.
Most menu items have one or more settable configuration options. The value of an option can
be changed by selecting a value from a list of available values.

To navigate through the main menu:
1.

Turn the button to move through the Main menu items. The item number and title starts
blinking. (The first item, Transmitter Status, doesn't blink.)

To jump to a sub-menu:
1.

Navigate in the Main menu to an item with three dots (e.g. 'Setup...').

2.

Push the button to go to the sub menu. The submenu item character and title starts
blinking

Notice!
To enter the Setup sub-menu, push and hold the button for at least 3 seconds.

To navigate through a sub-menu:
1.

Turn the button to move the cursor to the submenu item character.

2.

Push the button. The item character and title starts blinking.

7.1.2

Language Distribution System

Configuration | en

49

Bosch Security Systems B.V.

Operation manual

2013.11 | V1.4 |

«
...
47
48
49
50
51
...
»

Содержание INT-TX04































































































Отзывы:

Нет отзывов