INITIAL PREPARATIONS
•
Determine the operating voltage at the
installation site. The camera‘s Voltage Regulator
Board accepts both 10.5-40VDC and 12-28VAC
input without change to internal connections.
•
Determine the optimum mounting location for
the camera.
S
ee
Section 4, Camera Mounting.
•
All cameras have been tested and pre-focused
with telephoto setting as factory default prior to
shipment. If any adjustment needed, it is
advisable to check the camera’s operation
before installation.
GUIDELINES
The installation of the
EX80/82 Infrared Imager™
is
explained in Sections 1 to 7.
It is important that these steps are followed in numerical
order.
It is also important to follow proper safety guidelines
when installing this product.
