Bosch Infrared Imager EX80 Скачать руководство пользователя страница 2

Страница: 2 / 28

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep this instruction.

3. Heed

all

warnings.

4. Follow

all

instructions.

5.  Do not use this apparatus near water.

6.  Clean only with dry cloth.

7.  Do not block any ventilation openings. Install in

accordance with manufacturer instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce
heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong is provided for your safety. If the provided

Содержание Infrared Imager EX80





























Результаты поиска

Содержание Infrared Imager EX80

Отзывы:

Похожие инструкции для Infrared Imager EX80

Бренды по названию

Популярные бренды

Bosch Infrared Imager EX80, Руководство по установке

Результаты поиска

Содержание Infrared Imager EX80

Отзывы:

Похожие инструкции для Infrared Imager EX80

Бренды по названию

Популярные бренды