5. CAMERA LENS ADJUSTMENTS
AND SELECT A WINDOW
For optimum picture quality, the camera lenses
should be as close as possible to the inside face of
the viewing window, without touching.
The camera is pre-focused with telephoto setting as
factory default. Follow the steps below if any
adjustment needed.
•
Loosen the four bolts from the extrusion.
•
Remove the faceplate, window and the lens foam, set
aside. Make sure the photocell is not dislodged.
•
Loosen the two long bolts that hold the camera and
VRB together. Pull the camera assembly forward until
the lens setscrews can be easily reached.
•
Do proper adjustment as
5.1
Loosen the four bolts
Loosen the two long bolts
