en
Time-setting options
16
O
Time-setting options
Time-sett
ing optio
ns
Setting the time
After the appliance has been connected to the mains
for the first time or after a power cut, three zeros flash in
the display.
1.
Press the
0
button.
2.
Set the current time with the "+" and "-" buttons.
After 7 seconds, the time setting is adopted.
Note:
To change the set time, press the "+" and "-"
buttons and set the current time with the "+" and "-"
buttons.
Setting the timer
The timer has no influence on the functions of the oven.
The duration of the timer can be set to between 1
minute and 23 hours and 59 minutes.
1.
Press the "
0
" button.
The
V
symbol flashes in the display panel and three
zeros are displayed.
2.
Set the required cooking time with the "+" and "-"
buttons.
A signal sounds once the time has elapsed.
Notes
■
To change the set cooking time, select the timer with
the
0
button and set the cooking time using the "+"
and "-" buttons.
■
To cancel the settings, select the timer with the
0
button and press the "+" and "-" buttons
simultaneously.
Switching off the acoustic signal
Press the "-" button to switch off the acoustic signal.
After seven minutes, the signal switches off
automatically.
Changing the audible signal
Three different audible signals are available.
1.
Press the "+" and "-" buttons simultaneously.
2.
Press the
0
button.
The current audible signal is shown in the display
panel, e.g. "Tone 1".
3.
Press the "-" button to select a different audible
signal.
D
Cleaning agent
Cleaning
agent
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:
Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Suitable cleaning agents
Observe the following information to ensure that the
different surfaces are not damaged by using the wrong
type of cleaning agent.
Do not use any of the following
on the hob:
■
Undiluted washing-up liquid or dishwasher
detergent,
■
Abrasive materials, scouring sponges,
■
Aggressive cleaners such as oven spray or stain
removers,
■
High-pressure cleaners or steam jet cleaners.
Do not use any of the following
on the oven:
■
Any harsh or abrasive cleaning agents,
■
Cleaning agents with a high concentration of
alcohol,
■
Hard scouring pads or sponges,
■
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Area
Cleaning
Appliance exte-
rior
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth. Do not use glass cleaner or a glass scraper.
Stainless steel
front
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
