HPC Board Replacement and Installation
|
27
Heat Pump Controller
8733819577 (2019/02)
Heat Pump Controller
Subject to change without prior notice
4. In order to connect to the appliance, click the
Connect to Unit button shown in Fig. 25. The
Connect to unit via Wi-Fi screen displays. The
screen instructs the user to physically press
the button on the Wireless Interface Module
(WIM) to turn it on.
Fig. 25 Connect to the Unit via Wi-Fi
5. Press the WIM button as instructed. Once the
button is pressed, the WIM will broadcast a
Wi-Fi network SSID unique to the specific
WIM. If using an iOS or PC device, connect to
the Wi-Fi network via the settings menu before
continuing to the next step.
6. Click the Continue button in the app. The
Bosch network for the unit displays as shown
in Fig. 26.
Fig. 26 Select Network
7. Select the network.
8. Next select the connection method—either
manually entering the password for the
network or using the WIM’s QR code to
automatically enter the password.
•
Click the Connect by entering password
button then manually enter the password
that is printed on the WIM.
•
Click the Connect by scanning barcode
button then scan the QR code (with the
tablet’s camera.)
Once the password has been correctly
entered, you will be granted access to the
information on the appliance and the
“Connected to Unit” home screen displays.
Fig. 27 Connected Home Screen
[1]
Network
[2]
Connect by entering password button
[3]
Connect by scanning barcode button
[1]
Unit Serial Number
[2]
Disconnect from the Unit
[3]
Monitor Unit
[4]
Configure Unit Settings
[5]
Connection Status
