en
Cleaning and servicing
26
Display
Basic setting
Selection
Automatic rapid heating from 200 °C
2
= No
= Yes
1
Reset all values to factory settings
= no
1
= yes
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
22.2 Changing the basic settings
Requirement:
The appliance is switched off.
1.
Press and hold the button for approx.
four seconds.
a
The first basic setting appears in the display,
e.g. .
2.
Use the temperature selector to change the setting.
3.
Use the or button to switch to the next basic
setting.
4.
To save the changes, press and hold for approx.
four seconds.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
22.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a
All changes are discarded and not saved.
23 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
23.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶
Do not use aggressive or abrasive cleaning agents.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners if the appliance is
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶
Do not use oven cleaner in the cooking compart-
ment when it is still warm.
▶
Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
▶
Wash new sponge cloths thoroughly before use.
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Follow the instructions on cleaning the appliance.
→
"Cleaning the appliance", Page 27
Appliance
Surface
Suitable cleaning agents Information
Stainless steel
¡
Hot soapy water
¡
Special stainless steel
cleaning products
suitable for hot sur-
faces
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Enamel, plastic,
painted, and
screen-printed
surfaces
E.g. control panel
¡
Hot soapy water
Do not use glass cleaner or a glass scraper.
Knobs
¡
Hot soapy water
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
Ceramic hob
¡
Glass ceramic cleaner Follow the cleaning instructions on the product packaging.
Remove heavy soiling using a glass scraper.
Plinth drawer
¡
Hot soapy water
Clean with a dishcloth.