Bosch HGA24W255I, Инструкция по эксплуатации

Страница: 20 / 28

20
Removing and refitting the door panels
The glass panels can be removed from the oven door to allow
more thorough cleaning.
Removal
1.
Removing the oven door See the section Removing the oven
door . Lay the oven door on a cloth with the handle facing
downwards.
2.
Remove the cover from the top of the oven door. To do this,
press with your fingers on the left and right-hand side. Pull
out the cover (Fig. A).
3.
Raise the top panel and pull it out (Fig. B).
Clean the panels with glass cleaner and a soft cloth.
:
Risk of injury!
Scratched glass in the appliance door may develop into a
crack. Do not use a glass scraper, sharp or abrasive cleaning
aids or detergents.
Fitting
1.
Hold the top glass panel firmly by the sides and slide it in
towards the back at an angle. The panel must be inserted
into the openings on the lower side. The smooth surface must
face outwards, while the roughened side must be on the
inside. (Fig. A).
2.
Place the cover on the top of the oven door and press in
place. Make sure that the grooves along the sides lock into
position.
3.
Refitting the oven door See the section Refitting the oven
door .
Do not use the oven again until the panels have been
correctly fitted.
Oven door - Additional safety precautions
During long cooking times, the oven door may become very
hot.
If you have small children, extra supervision is required during
oven operation.
In addition, there is a protective device (protective grid) which
prevents direct contact with the oven door. You can purchase
this optional accessory (469088) from the after-sales service.
Troubleshooting
Malfunctions often have simple explanations. Refer to the table
before calling the after-sales service as you may be able to
remedy the fault yourself.
Fault table
If a dish does not turn out as well as you had hoped, refer to
the chapter: Tested for you in our cooking studio. It contains
useful tips and information on cooking, baking and roasting.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
% $
$
Fault Possible cause Troubleshooting/informa-
tion
The oven does
not work.
Faulty circuit
breaker
Look in the fuse box and
check that the circuit
breaker is in working order.
Power cut. Check whether the kitchen
light or other kitchen appli-
ances are working.
flashes in the
clock display.
Power cut. Reset the clock.
Oven not hot. Dust on the
contacts.
Turn the control knobs
clockwise and anti-clock-
wise a few times.
The burner
does not ignite.
Power cut or
damp ignition
plugs.
Light the gas burner with a
gas lighter or a match.
The gas grill
does not work.
The protecting
plate is incor-
rectly inserted.
Make sure that the protect-
ing plate is correctly
inserted.
Remove the protecting
plate and reinsert it.
Fault Possible cause Troubleshooting/informa-
tion