English |
9
Bosch Power Tools
1 609 92A 1RV | (3.11.15)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Spindle lock button
2
On/Off switch
3
Auxiliary handle (insulated gripping surface)*
4
Grinder spindle
5
Locking screw for protection guard
6
Protection guard for grinding
7
Mounting flange
8
Grinding wheel*
9
Clamping nut
10
Carbide grinding head*
11
Protection guard for cutting*
12
Cutting disc*
13
Hand guard*
14
Rubber sanding plate*
15
Sanding sheet*
16
Round nut*
17
Cup brush*
18
Cutting guide with dust extraction protection guard *
19
Diamond cutting disc*
20
Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 86 dB(A); Sound power level 97 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-3:
Surface grinding: a
h
=7.0 m/s
2
, K=1.5 m/s
2
,
Disk sanding: a
h
=4.0 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Angle Grinder
GWS 6700
GWS 6700
Article number
3 601 C75 ...
3 601 C75 ...
Rated power input
W
670
670
Rated speed
min
-1
12000
12000
Grinding disc diameter, max.
mm
125
115
Thread of grinder spindle
M 14
M 14
Thread length (max.) of grinder spindle
mm
17
17
Weight according to EPTA-Procedure 01:2014
– with standard-auxiliary handle
– with vibration-damping auxiliary handle
kg
kg
1.6
1.7
1.6
1.7
Net weight*
kg
1.5
1.5
Protection class
/
II
/
II
* measured without protection guard and auxiliary handle
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-2485-002.book Page 9 Tuesday, November 3, 2015 3:16 PM
