Bosch GWS 1000 PROFESSIONAL, Оригинальное руководство пользователя

Страница: 26 / 368

English | 27
Bosch Power Tools 1 609 929 K94 | (27.10.08)
f
The protection guard 11 may be turned only
upon actuation of the release lever 1! Oth-
erwise the power tool may not continue to
be used under any circumstances and must
be taken to an after-sales service agent.
Note: The encoding keys on the protection
guard 11 ensure that only a protection guard
that fits the machine type can be mounted.
Protection Guard for Cutting
f For cutting metal, always work with the pro-
tection guard for cutting 12.
f
For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 19.
The protection guard for cutting 12 is mounted
in the same manner as the protection guard for
grinding
11 .
Extraction Hood for Sanding
The extraction hood 6 can be used for low-dust
sanding of paint, varnish and plastics in con-
junction with the carbide grinding head
8 or the
rubber sanding plate 15 with a sanding sheet
16 . The extraction hood 6 is not suitable for
working metals.
A suitable Bosch vacuum cleaner can be con-
nected to the extraction hood
6 .
The extraction hood 6 is mounted in the same
manner as the protection guard 11 . The brush
collar is exchangeable.
Auxiliary Handle
f
Operate your machine only with the auxilia-
ry handle 4.
Screw the auxiliary handle 4 on the right or left
of the machine head depending on the working
method.
Hand Guard
f
For operations with the rubber sanding
plate 15 or with the cup brush/wheel
brush/flap disc, always mount the hand
guard 14.
The hand guard 14 is fastened with the auxiliary
handle 4 .
Mounting the Grinding Tools
f Before any work on the machine itself, pull
the mains plug.
f Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
Clean the grinder spindle 5 and all parts to be
mounted.
For clamping and loosening the grinding tools,
lock the grinder spindle with the spindle lock
button
2 .
f
Actuate the spindle lock button only when
the grinder spindle is at a standstill.
Other-
wise, the machine may become damaged.
Grinding/Cutting Disc
Pay attention to the dimensions of the grinding
tools. The mounting hole diameter must fit the
mounting flange without play. Do not use reduc-
ers or adapters.
When using diamond cutting discs, pay atten-
tion that the direction-of-rotation arrow on the
diamond cutting disc and the direction of rota-
tion of the machine (see direction-of-rotation ar-
row on the machine head) agree.
See graphics page for the mounting sequence.
To fasten the grinding/cutting disc, screw on
the clamping nut
9 and tighten with the two-pin
spanner; see Section “ Quick-clamping Nut ”.
f
After mounting the grinding tool and before
switching on, check that the grinding tool is
correctly mounted and that it can turn free-
ly. Make sure that the grinding tool does
not graze against the protection guard or
other parts.
An O-ring (plastic part) is in-
serted in the mounting flange
7
around the centring collar. If
the O-ring is missing or is
damaged,
it must in all cases
be replaced (article number
1 600 210 039) before the
mounting flange
7 is mounted.
OBJ_BUCH-310-002.book Page 27 Monday, October 27, 2008 2:16 PM