24
| English
1 619 929 J34 | (18.7.11)
Bosch Power Tools
Carrying the Power Tool
Before transporting the power tool, the following steps must
be carried out:
– Bring the machine into the transport position. (see “Trans-
port Position”, page 20)
– Remove all accessories that cannot be mounted firmly to
the power tool.
If possible, place unused saw blades in an enclosed con-
tainer for transport.
– Slide the saw-table extension
13
completely inward and
press tensioning lever
17
downward to lock it.
– Wind the mains cable around the cable holder
30
.
– For lifting or transport, use the recessed handles
4
or the
carrying handle
12
.
f
When transporting the power tool, use only the trans-
port devices and never use the protective devices.
f
The power tool should always be carried by two per-
sons in order to avoid back injuries.
Maintenance and Service
Maintenance and Cleaning
f
Before any work on the machine itself, pull the mains
plug.
If the machine should fail despite the care taken in manufac-
turing and testing procedures, repair should be carried out by
an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Cleaning
– For safe and proper working, always keep the power tool
and its ventilation slots clean.
– Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Power Tool Lubrication
Lubricants:
SAE 10/SAE 20 engine oil
– If required, lubricate the power tool at the indicated loca-
tions. (see figure Z)
An authorized Bosch after-sales service agent will carry out
this work quickly and reliably.
Observe all applicable environmental regulations when
disposing of old grease and solvents.
Measures for Noise Reduction
Measures on behalf of the manufacturer:
– Soft starting
– Delivery of the machine with a saw blade developed partic-
ularly for noise reduction
Measures on behalf of the user:
– Low-vibration assembly on a firm working surface
– Use of saw blades with noise-reducing functions
– Regular cleaning of saw blade and power tool
Accessories
Dust bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 610 015 511
Extraction adapter . . . . . . . . . . . . . . . . . . . . . 2 610 015 509
Y-adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 610 015 513
Angle stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 610 015 507
Push stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 610 015 022
Saw stand GTA 60 W . . . . . . . . . . . . . . . . . . . 0 601 B12 000
Saw stand GTA 600 . . . . . . . . . . . . . . . . . . . 0 601 B22 001
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 254 x 25.4 mm,
40 teeth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 608 640 901
Saw blade 254 x 25.4 mm,
60 teeth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 608 640 902
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Figure Product Feature
Storage Location
Y1
Blade guard
6
Insert into the recess of fix-
ture
34
and tighten clamping
screw
7
Y2
“Auxiliary parallel
guide” fastening kit
39
Clip into the holders
66
Y2
Extraction adapter
33
Insert into retaining clamp
67
Y3
Ring spanner
15
Fasten in tool depot with fas-
tening nut
68
Y3
Push stick
16
Mount onto fastening nut
68
and fasten by turning
Y4
Parallel guide
9
Turn guide around and hang
it into the guide rails from be-
low; tighten clamping handle
36
Y5
Allen key
14
Allen key
65
Insert into holders
69
Y5
Angle stop
3
Insert into retaining clamp
70
Y6
Auxiliary parallel
guide
38
Insert into retaining brackets
31
(short side goes on top;
long side toward the rear)
OBJ_BUCH-1473-001.book Page 24 Monday, July 18, 2011 10:33 AM
