-2-
Safety Instructions
Read all instructions.
Failure to follow all
instructions listed below may result in
serious personal injury.
F u l l y a s s e m b l e a n d t i g h t e n a l l t h e
f a s t e n e r s r e q u i r e d f o r t h i s s t a n d .
Periodically check that all fasteners
are attached and adjusted according to
the assembly instructions included in
this manual.
A loose stand is unstable
and may shift in use and cause serious
injury.
Turn tool switch off and disconnect
power before mounting to the stand.
Unintended startup during assembly can
cause injury.
Before operating make sure the entire
unit is placed on a solid, flat, level
surface.
Serious injury could occur if
tool is unstable and tips.
Never stand on tool or its stand or use
as ladder or scaffolding.
Serious injury
could occur if the tool is tipped or the
cutting tool is accidentally contacted.
Do not store materials on or near the
tool such that it is necessary to stand on
the tool or its stand to reach them.
Use only Bosch replacement parts.
Any
others may create a hazard.
Safety Symbols
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
!
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
2610047964.qxp_GTA47W 11/15/19 9:11 AM Page 2
