English |
9
Bosch Power Tools
1 609 929 S83 | (1.7.09)
Technical Data
Assembly
f
Before any work on the machine itself, pull
the mains plug.
Replacing/Inserting the Saw Blade
f
When mounting the saw blade, wear protec-
tive gloves.
Danger of injury when touching
the saw blade.
Selecting a Saw Blade
An overview of recommended saw blades can
be found at the end of these instructions. Use
only T-shank saw blades. The saw blade should
not be longer than required for the intended cut.
Use a thin saw blade for narrow curve cuts.
Inserting the Saw Blade (see figure A)
If required, remove the dust cover
14
(see “Dust
Cover”).
Insert the saw blade
12
(teeth in cutting direc-
tion) into the stroke rod until it latches
10
.
While inserting the saw blade, pay attention that
the back of the saw blade is positioned in the
groove of the guide roller
11
.
Jigsaw
GST 120 E
Professional
GST 120 BE
Professional
Article number
0 601 510 6..
0 601 511 6..
Stroke rate control
–
z
Stroke rate preselection
z
z
Orbital action
z
z
Rated power input
W
650
650
Stroke rate at no load n
0
min
-1
1500–2800
500–2800
Stroke
mm
26
26
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
mm
mm
mm
120
20
10
120
20
10
Bevel cuts (left/right), max.
°
45
45
Weight according to EPTA-Procedure 01/2003
kg
2.6
2.7
Protection class
/
II
/
II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
10
11
OBJ_BUCH-655-004.book Page 9 Wednesday, July 1, 2009 5:13 PM
