1 600 A00 3UF | 05.2014
Bosch Power Tools
English |
15
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles.
A careless action can cause severe injury
within a fraction of a second.
i) Use ear protectors.
Exposure to noise can cause hearing
loss.
4. Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the
job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and
free from oil and grease.
Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations
.
5. Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
b) In case of consuming of the carbon brushes to send
the tool by assistance authorized technique for
substitution.
Carbon brushes are of specify them cause
damages to the motor of the tool.
c) If the power cord is damaged, the power cord shall be
replaced by manufacturer, service or qualified person to
avoid the risk of electrical shock.
Safety Warnings for Sander
►
Use the machine only for dry sanding.
Penetration of water
into the machine increases the risk of an electric shock.
►
Caution, fire hazard! Avoid overheating the object
being sanded as well as the sander. Always empty the
dust collector before taking breaks.
In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of
varnish, polyurethane or other chemical materials and
when the sanding debris is hot after long periods of
working.
►
Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
Products sold in GB only:
Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Functional Description
Read all safety warnings and all
instructions.
Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
While reading the operating instructions,
unfold the graphics page for the machine and
leave it open.
Intended Use
The machine is intended for dry sanding of wood, plastic,
filler and coated surfaces.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1
On/Off switch
2
Dust box, complete (Microfilter System) (GSS 140 - 1A)
3
Rear clamping bracket
4
Sanding plate
5
Sanding-sheet clamps (2x)
6
Sanding sheet*
7
Front clamping bracke
8
Handle (insulated gripping surface) (Softgrip only for
GSS 140 - 1A)
9
Extraction outlet (GSS 140 - 1A)
Manual GSS 140-1 e 140-1A Professional.indd 15
30/06/14 09:45
