-5-
Additional Safety Warnings
GFCI and personal protection devices like
electrician’s rubber gloves and footwear will
further enhance your personal safety.
Do not use AC only rated tools with a DC
power supply.
While the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
Keep handles dry, clean and free from oil
and grease.
Slippery hands cannot safely
control the power tool.
Develop a periodic maintenance schedule for
your tool. When cleaning a tool be careful
not to disassemble any portion of the tool
since internal wires may be misplaced or
pinched or safety guard return springs may
be improperly mounted.
Certain cleaning
agents such as gasoline, carbon tetrachloride,
ammonia, etc. may damage plastic parts.
Some dust created by
power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals
are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Y o u r r i s k f r o m t h e s e e x p o s u r e s v a r i e s ,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such
a s t h o s e d u s t m a s k s t h a t a r e s p e c i a l l y
designed to filter out microscopic particles.
m. Ensure the switch is in the OFF position
before inserting battery pack.
Inserting
the battery pack into the power tool that
has the switch ON invites accident.
n.
When operating the saw continuously
and for prolonged periods of time, the
gearbox may become hot to touch.
To
reduce the risk of injury, wear protective
gloves during saw operation.
Safety Rules for Cordless Reciprocating Saws
