Bosch GOP 30-28 Professional, Оригинальное руководство пользователя

Страница: 18 / 325

18 | English
u
Only use the power tool for dry sanding. Water entering
a power tool will increase the risk of electric shock.
u
Warning: Danger of fire! Avoid overheating the work-
piece and the sander. Always empty the dust collector
before taking a break from work.
Sanding dust in the
dust bag, microfilter, paper bag (or in the filter bag or va-
cuum cleaner filter) can spontaneously combust under
certain conditions, for example if flying sparks are cre-
ated when sanding metals. This risk is increased if the
sanding dust is mixed with paint or polyurethane residue
or with other chemical substances and if the workpiece is
hot as a result of prolonged work.
u
Keep hands away from the sawing area. Do not reach
under the workpiece.
Contact with the saw blade can
lead to injuries.
u
Clean the air vents on your power tool regularly. The
motor’s fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
u
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility com-
pany for assistance.
Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
u
Hold the power tool firmly with both hands and make
sure you have a stable footing.
The power tool can be
more securely guided with both hands.
u
When changing the application tool, wear protective
gloves.
Application tools can become hot when used for
prolonged periods of time.
u
Do not scrape any dampened materials (e.g. wallpa-
per) or on damp surfaces.
Water entering a power tool
increases the risk of electric shock.
u
Do not treat the surface you will be working on with
any fluids that contain solvents.
Poisonous vapours
may develop due to the materials heating up when being
scraped.
u
Take particular care when handling scrapers and
blades.
The application tools are very sharp. Danger of in-
jury.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. non-hardened nails, clamps). It
is also suitable for working on soft wall tiles and for dry sand-
ing and scraping of small areas. It is ideal for working close to
edges and flush with surfaces. The power tool must only be
operated using Bosch accessories.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2)
Orbital stroke rate preselection thumbwheel
(3) Ventilation slots
(4) Tool holder
(5) Plunge cut saw blade
A)
(6) Clamping bolt (GOP 30‑28)
(7) Hex key (GOP 30‑28)
(8) Dust extraction system
A)
(9) Sanding plate
A)
(10) Sanding sheet
A)
(11) Handle (insulated gripping surface)
(12) SDS lever for unlocking tools (GOP 40‑30/
GOP 55‑36)
(13) Worklight (GOP 40‑30)
(14) Clamping lever for depth stop
A)
(15) Depth stop
A)
(16) Clamping lever for dust extraction system
A)
(17) Dust extraction outlet
A)
(18) Dust extraction adapter
A)
(19) Dust extraction hose
A)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Multi-cutter GOP 30-28 GOP 40-30 GOP 55-36
Article number 3 601 B37 0.. 3 601 B31 0.. 3 601 B31 1..
1 609 92A 5NS | (04.06.2020) Bosch Power Tools