Bosch GKS 18V-68 GC, Оригинальное руководство пользователя

Страница: 25 / 377

English | 25
GKS 18V-68 GC
The cutting depth can be set using the button for cutting
depth preselection
(22) .
GKS 18V-68 C
The cutting depth can be set using the lever for cutting depth
preselection
(23) .
For a smaller cutting depth, pull the saw away from the base
plate
(13) ; for a larger cutting depth, push the saw towards
the base plate (13) . Set the required cutting depth on the
scale (17) .
Adjusting the mitre/bevel angle
We recommend that you place the power tool down on the
front side of the protective guard
(16) .
GKS 18V-68 GC
Loosen the adjusting lever for mitre/bevel angle preselection
(5) and the wing bolt (15) . Swivel the saw to the side. Set
the required mitre angle on the scale (7) . Retighten the ad-
justing lever (5) and the wing bolt (15) .
Note: When making mitre cuts, the cutting depth is less than
the value shown on the cutting depth scale (17) .
GKS 18V-68 C
Loosen the adjusting lever for mitre/bevel angle preselec-
tion
(5) . Swivel the saw to the side. Set the required mitre/
bevel angle on the scale (7) . Screw the adjusting lever (5)
back on again.
Note: When making mitre cuts, the cutting depth is less than
the value shown on the cutting depth scale (17) .
Cut Marks
GKS 18V-68 GC
0 45
0 45
The 0° cut mark (8) indicates the position of the saw blade
when making a right-angled cut. The 45° cut mark (9) indic-
ates the position of the saw blade when making a 45° cut.
For a precise cut, place the circular saw against the work-
piece as shown in the figure. We recommend making a test
cut.
GKS 18V-68 C
0 45
0 45
The 0° cut mark (9) indicates the position of the saw blade
when making a right-angled cut. The 45° cut mark (8) indic-
ates the position of the saw blade when making a 45° cut.
For a precise cut, place the circular saw against the work-
piece as shown in the figure. We recommend making a test
cut.
Using the FSN Guide Rail System
GKS 18V-68 GC
When using the FSN guide rail system, the power tool can
stay in the holder for the guide rail when making mitre cuts.
(8)
Use only cut marks (8) when
making a right-angled cut
and a 45º cut with the guide
rail.
Start-up
Inserting the battery
Push the charged battery (19) into the power tool until the
battery is securely locked.
Switching on/off
To start the power tool, first press the lock-off switch (1) ,
then press and hold the on/off switch (2) .
To switch off the power tool, release the on/off switch (2) .
Note: For safety reasons, the on/off switch (2) cannot be
locked; it must remain pressed during the entire operation.
Protection Against Deep Discharging
The lithium-ion battery is protected against deep discharge
by the Electronic Cell Protection (ECP). When the battery is
discharged, the power tool is switched off by means of a pro-
tective circuit: The application tool no longer rotates.
ECO Mode
GKS 18V-68 GC
If the power tool is operated in the energy-saving ECO mode,
the battery life may be up to 30 % longer.
If the ECO mode is active, the symbol
E is shown on the
speed setting/mode indicator (37) .
User Interface (see figure C)
GKS 18V-68 GC
The user interface (3) is used to preselect the speed and to
indicate the status of the power tool.
Bosch Power Tools 1 609 92A 5FB | (24.02.2020)