English |
21
Bosch Power Tools
1 609 929 T86 | (16.12.09)
f
Check the operation of the lower guard
spring. If the guard and the spring are not
operating properly, they must be serviced
before use.
Lower guard may operate slug-
gishly due to damaged parts, gummy depos-
its, or a build-up of debris.
f
Lower guard should be retracted manually
only for special cuts such as “plunge cuts”
and “compound cuts”. Raise lower guard by
retracting handle and as soon as blade en-
ters the material, the lower guard must be
released.
For all other sawing, the lower
guard should operate automatically.
f
Always observe that the lower guard is cov-
ering the blade before placing saw down on
bench or floor.
An unprotected, coasting
blade will cause the saw to walk backwards,
cutting whatever is in its path. Be aware of
the time it takes for the blade to stop after
switch is released.
f
Do not reach into the saw dust ejector with
your hands.
They could be injured by rotat-
ing parts.
f
Do not work overhead with the saw.
In this
manner you do not have sufficient control
over the power tool.
f
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
f
Do not operate the power tool stationary.
It
is not designed for operation with a saw ta-
ble.
f
Do not use high speed steel (HSS) saw
blades.
Such saw blades can easily break.
f
Do not saw ferrous metals.
Red hot chips
can ignite the dust extraction.
f
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance.
The power tool is guided
more secure with both hands.
f
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f
Always wait until the machine has come to
a complete stop before placing it down.
The
tool insert can jam and lead to loss of control
over the power tool.
f
Do not open the battery.
Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture.
Danger of
explosion.
f
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints.
The vapours can irritate the
respiratory system.
f
Use the battery only in conjunction with
your Bosch power tool.
This measure alone
protects the battery against dangerous over-
load.
f
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool.
When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.
Functional Description
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
OBJ_BUCH-755-003.book Page 21 Wednesday, December 16, 2009 9:18 AM
