16
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and the ventilation slots
clean.
Exchanging dust cap
Damaged
dust protection caps should be replaced as soon as possible since
dust that enters the tool holder can cause malfunctions.
Pull back and hold the locking sleeve
2
. Pull off the dust cap
1
with a suitable
tool.
With the locking sleeve pulled back, pull on the new dust cap until it sits firmly
over the tool holder and the locking sleeve can again be slid forward.
WARNING
Important instructions for connecting a new 3-pin plug to the 2 wire
cable.
The wires in the cable are coloured according to the following code:
Do
not
connect the
blue or brown wire to
the earth terminal of the
plug.
Important:
If for any
reason the plug is cut
off of the cable of this
machine, it must be
disposed of safely and
not left unattended.
If the machine should happen to fail despite the care taken in manufacture and
testing, repair should be carried out by an authorised customer services agent
for Bosch power tools.
For all correspondence and spare parts orders, always include the 10 digit order
number of the machine!
Measured values determined according to EN 50 144.
Typically the A-weighted noise levels of the tool are:
Sound pressure level: 86 dB(A). Sound power level: 99 dB(A).
Wear ear protection!
The typical weighted acceleration is 10 m/s
2
.
We guarantee Bosch appliances in accordance with statutory/country-specific
regulations (proof of purchase by invoice or delivery note).
Damage attributable to normal wear and tear, overload or improper handling will
be excluded from the guarantee.
In case of complaint please send the machine,
undismantled
, to your dealer or
the Bosch Service Centre for electric power tools.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
✆
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (08 95) 83 86 81
✆
Advice line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (08 95) 83 84 02
FAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (08 96) 83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
✆
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4 51 52 11
FAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4 51 71 27
We declare under our sole responsibility that this product is in conformity with
the following standards or standardization documents: EN 50 144, EN 55 014,
EN 61000-3, HD 400 according to the provisions of the regulations 73/23/EEC,
89/336/EEC, 89/392/EEC.
94
Dr. Alfred Odendahl
Dr. Eckerhard Strötgen
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Maintenance and Cleaning
Noise/vibration information
strain relief
live
= brown
neutral
= blue
To be fitted
by qualified
professionals only
Guarantee
Service
Declaration of conformity
Specification subject to alteration without notice
